How to Fix Windows Update Error 0x80070643 on Windows 11/10

Share

Illustration of a monitor showing the Windows Update settings page with Install error 0x80070643 and a Retry button

Error 0x80070643: find out which update failed, then use the fix for that kind of update.

Error 0x80070643 is a Windows Update message that means an update started installing and then failed partway through. Windows shows it in Settings > Windows Update as Install error – 0x80070643, often for the same update day after day.

The code itself is generic. What fixes it depends on which update failed: a Microsoft Defender update, a .NET Framework update and a Windows recovery update each need a different fix. So the first step is a 30-second look at your update history.

Below: what the code means, how to see which update failed, a table that matches the update to its fix, eight fixes in order, and a video that walks through resetting Windows Update. Still stuck after trying them? Reach out to us directly.

Error code
0x80070643
Meaning
Install failed
Affects
Windows 10 / 11
Difficulty
Beginner to advanced

What Does Error 0x80070643 Mean?

Windows error codes that start with 0x8007 wrap an ordinary Windows error number. Here the last part, 0643, is error 1603 written in hexadecimal: Fatal error during installation.

In plain words: the update downloaded fine, the installer started, and then something stopped it. It is not a crash and it does not damage your PC. The update simply did not install, and Windows will keep offering it.

Because many kinds of updates use the same installer, this one code covers very different problems, from a full disk to a recovery partition that is too small. That is why the fixes below are grouped by update type.

Find Out Which Update Failed

Open Settings > Windows Update > Update history. Look for the entry marked Failed to install and note its name and KB number (Microsoft’s ID for each update).

Windows 11 Settings, Windows Update, Update history page listing feature updates and quality updates, each with its install status and date
Update history on our test PC. A failed update shows Failed to install under its name instead of Successfully installed.
Match the Failed Update to Its Fix
Select a fix to jump to it
Update name contains What it is Start with
Security Intelligence Update for Microsoft Defender Virus definitions for the built-in antivirus Fix 4
.NET Framework A framework many apps rely on Fix 5
Windows Recovery Environment, or Safe OS Dynamic Update An update to the hidden recovery partition Fix 6
Cumulative Update or Security Update for Windows The monthly Windows update Fix 1 to Fix 3, then Fix 7
A driver or firmware name A hardware driver from the maker Fix 8

How to Fix Error 0x80070643 on Windows 10/11

Fixes 1 to 3 help with any update. Then jump to the fix for your update type.

1

Restart, then run the Windows Update troubleshooter

10 minutes

A pending restart from an earlier update often blocks the next one. Restart the PC (Restart, not Shut down), then try again from Settings > Windows Update > Check for updates.

  • Still failing? Run Microsoft’s troubleshooter: Settings > System > Troubleshoot > Other troubleshooters, then Run next to Windows Update. On Windows 10 it is Settings > Update & Security > Troubleshoot > Additional troubleshooters.
  • Let it apply any fixes it finds, restart, and check for updates again.
2

Free up space and check the date and time

10 minutes

Microsoft’s update troubleshooting page says a 64-bit PC needs at least 20 GB of free space for updates. A wrong clock can also break the secure download.

  • Free space: Settings > System > Storage > Cleanup recommendations, or turn on Storage Sense. Empty the Recycle Bin and remove large files you do not need.
  • Date and time: Settings > Time & language > Date & time. Turn on Set time automatically and select Sync now.
3

Reset Windows Update’s download cache

10 minutes

If an update file downloaded with errors, Windows keeps trying the same broken copy. Clearing the cache makes it download fresh. The video below shows this. Right-click Start, choose Terminal (Admin), and run these one at a time:

net stop wuauserv
net stop bits
ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
net start bits
net start wuauserv

Then check for updates again. Windows rebuilds the folder by itself. Once updates work, you can delete the SoftwareDistribution.old folder.

4

Microsoft Defender update failed: update it directly

5 minutes

If the failed item is a Security Intelligence Update for Microsoft Defender, update the antivirus from Windows Security instead of Windows Update.

  • Open Windows Security from the Start menu, then Virus & threat protection > Protection updates > Check for updates.
  • Still failing? Microsoft offers the same update as a file you run yourself on its security intelligence updates page. Download the package for your PC (64-bit for most) and double-click it.
  • Using another antivirus? Defender updates can fail while a third-party antivirus is active. That is harmless, since your other antivirus is protecting you, but you can hide the update (Fix 8).
5

.NET Framework update failed: repair .NET

15 minutes

.NET Framework updates fail when the existing .NET install is damaged. Microsoft has a free tool that finds and repairs common .NET problems.

  • Download the Microsoft .NET Framework Repair Tool from the Microsoft Download Center and run it. Accept its suggested changes and let it finish.
  • Restart and check for updates again.
  • Still failing? Run the DISM and SFC repair in Fix 7, which also repairs the Windows parts .NET relies on.
6

Recovery update failed: check the recovery partition

20 to 40 minutes

Updates to the Windows Recovery Environment install into a small hidden partition on your drive. Microsoft says it needs 250 MB of free space, and on many PCs it has less. That was behind the widespread KB5034441 failures on Windows 10 in 2024.

  • Check the recovery partition: in Terminal (Admin), run the command below. Windows RE status should say Enabled, and the location shows which disk and partition it uses.
reagentc /info
  • If the status is Disabled, run reagentc /enable and try the update again.
  • If it is enabled and the update still fails, the partition needs to be bigger. Microsoft’s KB5028997 instructions shrink the Windows partition by 250 MB and rebuild the recovery partition with diskpart.

Back up before resizing partitions. The steps are safe when followed exactly, but a wrong disk or partition number in diskpart can erase data. If you are not comfortable with that, it is reasonable to hide this one update (Fix 8): it only updates the recovery tools, not Windows security.

7

Repair Windows files with DISM and SFC

30 minutes

Damaged Windows files can stop any update from installing. Microsoft’s update troubleshooting page recommends these two commands. In Terminal (Admin), run:

DISM.exe /Online /Cleanup-image /Restorehealth
sfc /scannow

Run them in that order, restart, and check for updates again.

8

Install the update by hand, or hide it

15 minutes

If Windows Update still cannot install it, get the update yourself, or stop it from being offered.

  • Install by hand: search the KB number on the Microsoft Update Catalog, download the version for your Windows (x64 for most PCs), and double-click the file.
  • Driver or firmware update? Get it from your PC maker’s support page instead, then let Windows Update skip it.
  • Optional updates: updates listed under Advanced options > Optional updates can simply be left uninstalled. Monthly security updates should not be skipped for long.

Video Walkthrough

This walkthrough from Britec09 shows stopping the Windows Update service, clearing its cache and restarting it (Fix 3), and where to find Microsoft’s own update troubleshooting page.

How to Avoid Update Errors

SPACE

Keep 20 GB free

Microsoft’s minimum for updates on a 64-bit PC. Big updates need room to unpack.

RESTARTS

Restart weekly

A PC that is only ever put to sleep piles up pending restarts, and those block the next update.

SECURITY

One antivirus

Third-party antivirus can block Defender and .NET updates. Use one or the other, not both.

HABIT

Check update history now and then

A failed update is easy to miss. A monthly look at Update history catches it early.

Frequently Asked Questions

Is my PC unprotected if error 0x80070643 keeps happening?
It depends on which update failed. A failed Defender definitions update means the antivirus is missing the newest definitions, so update it from Windows Security (Fix 4). A failed recovery partition update does not affect day-to-day protection.
Can I just ignore error 0x80070643?
For optional, driver or recovery partition updates, ignoring it is usually fine. For monthly security updates and Defender definitions, fix it, since those protect the PC against current threats.
Why does the same failed update keep coming back?
Windows Update offers every update your PC is missing until it installs. It will keep retrying the failed one daily, and the error repeats until the cause is fixed or the update is replaced by a newer one.
Does error 0x80070643 mean my hard drive is failing?
Rarely. It usually means the installer could not finish because of space, damaged files or a partition problem. If chkdsk or your drive maker’s tool reports errors, then the drive is worth checking.
Is error 0x80070643 the same as error 0x800f0923?
No. 0x800f0923 usually means a driver or app on your PC is not compatible with the update. 0x80070643 means the installer itself failed partway through.

Support and Community

More Windows Error Fixes


Discover more from Windows Mode

Subscribe to get the latest posts sent to your email.